product-categories-hero

Inverted Chain

Inverted chain conveyors are mostly mounted on the floor at a low level, so the product is secured on top of a shaft or spigot from the top side of the track section rather than suspended from above. Inverted conveyors have proven particularly popular in alloy wheel refurbishment and glass / plastic bottle finishing.

products-floor-conveyors-inverted-chain-trakmaster-203i

Trakmaster 203i

The Trakmaster 203 runs in a 57mm x 41mm rectangular track and has a chain pitch of 203mm (8”), specially machined spigot can be added to te horizontal link to give a spigot pitch of 101.5mm (4”).

Download Data Sheet
Product Placeholder

Trakmaster 406i

The Trakmaster 406i runs in a cruciform type of track section that is fabricated together from two “top hat” sections and intermediate bridge plates. Similar to the overhead 406 but using rigid spigots from the top of the track section.

Download Data Sheet
products-floor-conveyors-inverted-chain-omnitrak-bottle-conveyors

Omnitrak Bottle Conveyors

The Omnitrak Bottle Conveyors come in two different sizes. The 406OT, which has available pitches of 75, 100 & 150mm and generally is used for larger spirit / beer bottles & the OTL which has a pitch of 50mm and has proven popular for perfume and cosmetics containers.

Download Data Sheet
products-floor-conveyors-inverted-chain-inverted-power-free

Inverted Power & Free

Inverted Power & Free conveyors are available generally in the same forms as the overhead variants with minor changes such a spring-loaded dogs to counter the effects of gravity. Again popular in alloy wheel refurbishment and other paint finishing applications.

Download Data Sheet